SCYTHE
123
Free Shipping Purchase above RM100(Penisular Only)
SCYTHE
SCYTHE
Sort by
Show result

Shuriken 2
Thanks to its compact dimensions and low height of only 58 mm, the Shuriken 2 is ideally suited for ITX systems and other confined applications. A remarkable cooling capacity is achieved for its size. Four heat pipes transfer the heat from the CPU to the compact heat sink, which is only slightly larger than the decoupled 92 mm fan. The PWM controlled fan comes from the Kaze Flex series and, despite the reduced height of only 16mm, is equipped with a Fluid Dynamic Bearing (FDB) archieving an average lifespan of 100 000 hours. The assembly is as easy as usual by utilizing the proven HPMS III Mounting System and a pre-installed mounting bar with spring-loaded screws. The Shuriken 2 combines the advantages of Scythe coolers in a space-saving and compact solution.

RM150.00

Big Shuriken 3 RGB
The third generation of the Big Shuriken was developed with the aim of increasing the cooling capacity while maximizing the compatibility with modern systems. Due to the redesign, the cooler differs significantly from its predecessors, both in terms of appearance and general structure. Despite its height of only 69 mm, the Big Shuriken 3 RGB is able to deliver outstanding cooling performance for compact high-end ITX and HTPC systems. Thanks to the asymmetrical design of the heat sink, in which the base plate is laterally offset, optimal compatibility is achieved. The new Kaze Flex 120 Slim RGB PWM fan with translucent fan blades and controllable RGB LED lighting is used for effective ventilation with an attractive and colorful appearance.

RM210.00

Katana 5

The fifth generation of the popular Katana CPU cooler comes with a revamped asymmetric heatsink design and total height of only 135 mm, offering unrestricted compatibility to mainboards and memory modules. The second generation of the Easy Clip Mounting System (E.C.M.S) assures a fast and easy installation process. The Intel clip is already preassabled but can be switched out with only a few steps. Another key innovation of the Katana 5 is the newly developed Kaze Flex 92 PWM fan. It combines the high-quality Sealed Precision Fluid Dynamic Bearing with anti-vibration rubber spacers for silent operation and long life-span of 120 000 hours MTTF.

RM140.00

MODEL NAME : KOTETSU MARK II ARGB
    MODEL NUMBER : SCKTT-2000BKA
    SOCKET : INTEL -LGA 2066 / 2011(V3) / 1366 / 1200 / 115X / 775
    : AMD -AM4 / AM3(+) / AM2(+) / FM2(+) / FM1
    DIMENSION : W136.0 XD 85.0 XH154.0 MM
    WEIGHT(FAN INCLUDED) : 645G

RM190.00

Mugen 5 ARGB Edition
 

  • Outstanding Design
    The stylish, black anodized aluminium top plate is embellished with and eye-catching diamond cut logo. The fan was outfitted with black rubber shock absorbers to keep them in tone with the overall design.
  • Kaze Flex 120 RGB PWM Fan
    Our in-house designed Kaze Flex 120mm RGB PWM fan with a speed range of 300 to 1,200 RPM is used on the Mugen 5 black RGB Edition. This fan is characterized by a closed liquid storage (Sealed Precision FDB) and an average life of 120,000 hours. Thanks to the RGB LED lighting of the translucent fan blades, the fan offers a breathtaking visual accent. Rubberized contact surfaces have a decoupling effect and prevent the transmission of any vibrations that may occur.
  • Asymmetrical Design
    Thanks to gently sloped heatpipes, the heat sink is not located directly above the bottom plate, but slightly offset to the rear. This asymmetrical design, in combination with a recess on the back of the heatsink, allows for unrestricted use of the memory banks. The high-quality cooper heatpipes and base-plate are completely nickel-plated.
  • H.P.M.S. II Mounting System
    The cooler features the proven and easy-to-use Hyper Precision Mounting System II. A preassembled mounting bar simplifies the installation process, while spring-loaded screws prevent uneven pressure distribution. The mounting system supports all common sockets, including AMD®s AM4 and Intel®s Socket 2066. The Mugen 5 ARGB package also includes an extra long screwdriver for easy mounting.
RM260.00

Mugen 5 Black Edition
SCMG-5100BE
Based on the classic Mugen 5 cooler, this new edition comes with an all-black Kaze Flex 120 fan (ramp up to 1500 rpm) that pushes its performance to the next level. With the additional fan clip and upgraded mounting system, the Mugen 5 Black Edition is the premium choice of excellent performance and superb quietness.

RM260.00

With a new WS-120 fan, the Mugen 5 S offers greater cooling performance and less noise than the Rev.B. The new mounting system (H.P.M.S.IV) supports most modern sockets on the market, and provides more straightforward installation and optimal contact pressure.

RM240.00

The classic twin-tower design of the Fuma 2 is not centered directly above the CPU socket, but offset by inclined heatpipes. This asymmetrical design provides maximum space for the memory banks. Also the cooling fins of the second tower are aligned in such a way that even memory banks on both sides of the CPU socket can be operated without problems, without restricting the effectiveness of the heat sink. Despite the enormous cooling surface of the Fuma 2 remains at a height of 154.5 mm and fits into any standard PC case.

RM219.00
  • The compact Kotetsu Mark II CPU-Cooler offers many improvements over its predecessor.
  • Features include: a height of only 154mm, asymmetric heatsink design for maximum memory and graphics card compatibility, an optimized and easy-to-install mounting system, as well as a 120mm fan from the award winning Kaze Flex 120mm PWM series.
  • Four nickel-plated heatpipes and a embossed topplate provide an appealing and sophisticated look. In summary, the Kotetsu Mark II offers a convincing overall concept at a low price.
RM160.00

Dimensions : 120 x 120 x 26mm

Bearing : Sealed Precision FDB

Life Span : 120,000 hrs

Voltage : 12V

Connector: 4-pin

Weight : 160 ± 10%

Accessories : screws X 4、tool-less screws X 4、200 mm extension cable X 1

RM43.00