MUGEN5 | SCMG-5102AR
Based on Scythe best seller Mugen 5 CPU Cooler, the Addressable RGB edition is now available. By adding second fan for push-pull configuration, this would increase airflow and exhaust heat more efficiently. ARGB fan and top cover is sync and controlled by ARGB motherboards or controller included, Mugen 5 ARGB Puls provide not only top-tier performance, also vivid and colorful lighting effect for your build.
Thanks to an oﬀset layout, the cooler will not overhang RAM slots. On 2011(v3) / 2066 platforms, the rear fan can be mounted higher to ﬁt tall memory heat-spreaders, which increases the overall height of the cooler.
Fully Addressable RGB Sync
Equipped with dual ARGB Kaze Flex PWM fans with max. speed of 1500 rpm and an ARGB top cover, the cooler provides top-tier performance as well as vivid, colorful eﬀects from all view angles.
branch cable with extension option. SYNC with Motherboard ARGB Header ARGB 3-Pin branch cable with extension option.
Wired ARGB Controller
The cooler is sync and controlled with ARGB motherboard or ACT-1000ARL included. The case reset button can be connected to controller making it easier to choose lighting mode.
The controller is programmed with 14 modes of lighting effects and 5 modes of lighting speed, 16 millions colors can be achieved easily with this small controller.
Mugen 5 ARGB PLUS
Socket LGA2011 / 2011-v3 (Square ILM)
Overall Dimensions WxHxD:
136 x 134 x 157.5 mm / 5,35 x 5,28 x 6,20 in (including fan - more details)
1060 g / 35.84 oz (incl. Fans)
Mounting parts for Intel and AMD sockets, thermal grease, Adjustalbe RGB fan, Adjustable RGB top cover, Adjustable RGB Controllerfan clips, manual
Baseplate Material / Heatpipes:
Nickel-plated copper (additional information)
Please note that an original backplate with screw mounting is needed for installation on mainboards with AMD sockets. Please check before buying if the backplate is fixed by screws (example)! If the backplate uses plastic-pins, mounting of this cooler is not possible.
Kaze Flex 120 ARGB PWM
120 x 120 x 27 mm / 4,72 x 4,72 x 1,06 inch
4,0 ~ 29,75 dBA
16,6 ~ 66,47 CFM / 28,20 ~ 112,93 m³/h
300 (±200 rpm) ~ 1.500 rpm (±10%) (PWM-controlled)
0,75 ~ 16,38 Pa / 0,0762 ~ 1,67 mmH²O
Sealed Precision FDB
120.000 Hours (25°C)
1 x SCYTHE Mugen 5 ARGB Plus Air Cooler